Technical Characteristics:

• Image sensor Sony Starlight IMX290, output AHD / TVI / CVI / Analog(CVBS), Effective resolution is 1920 * 1080 / 960H

• OSD menu supports 15 different languages  with BLC / strong light inhibition / motion detection / privacy protection, 2D / 3D noise reduction function
  

• Adopt Nextchip 2450H DSP, with OSD function (mirror image, color / white-black, PAL / NTSC)
  

• Support 3X AF + UTC + UTC controls AF  With WDR  Support auto iris
  

• AGC type, day-night effect is distinct, various day-night modes can be switched by OSD menu, with screen-frozen function.
  

• Support UTC, 4 in 1, switched by OSD, Enhancement adjusted supported by OSD
  

• Power (600W) &amp  Video (2KV) dual-lightning protection design, OSP antioxidant PCB, size 32 * 38 dual-board
  

OSD Function description ：

• PAL / NTSC: Enter into OSD menu, enter into option 8 (adjust) and then go into option 5 (NTSC / PAL) to switch freely, Press left / right button to switch freely, press left button (press shortly) once to Pal, twice to NTSC, left button to return, press enter to save (default is Pal)

• 4-in-1 Switch: 2 methods:
  

• (1) Enter into OSD menu, enter into option 8 (adjust) and then go into option 1 (Monitor) to switch freely, press right button (press shortly) once is CVI, Twice is TVI, three times is CVBS, four times to stop, press left button to return, press enter to save (default is AHD)

• (2) Default is AHD 1080P, enter into OSD menu-exposure (press right button 3 times) -enter, goes into factory debugging mode, so you can switch freely.

OSD menu shortcut key:
This product supports Auto-focus and zoom function, the matched function for OSD menu shortcut key is as following:
LEFT（ Focus +） RIGHT（ Focus -） UP（ Zoom +） DOWN（ Zoom +）

Pin definition:

OSD Menu Port

    D Down (Orange)

    U Up (Gray)

    E Enset (Purple)

    R Right (Green)

    L Left (White)

    G GND (Brown)

    M1 M2 Can set to Mode switch or Alarm Output

Power video port

    V    Yellow

    -/G    Ground

    +    Power+

CDS     LED board photoresist

ICR    IR-CUT dual filter switch

Matched   motorized lens：（The program should be corresponding   with the millimeter of lens）

(1) M14/2.8-8mm_1/2.7(1.25*8pin)

(2) M14/2.8-12mm_1/2.7(1.25*8pin)

Recommended lens: D14-02812IR(3MP)-C-EE /  D14-02812ICR(3MP)-C-EE（ with ICR）

The operation and notice for adjusting   &amp  installing AF electric lens:

After
the initialization of lens, revise the green region manually (the kneck of ICR and M14)

Firstly-- Right&amp  Left adjustment  then-- Up
&amp  Down ring form adjustment  until the best focused definition.

The red region is automatic gear, cannot be manually adjusted, otherwise   it will be damaged.

AHD 3X AF Features

(1) This board support motorized lens M14 / 2.8-8mm or 2.8-12mmAF, support UTC, onboard DC lens (Auto Iris) function.

(2) Support UTC, you can use mouse wheel or Dynamic arrow to control AF zoom, or operate ZOOM or Focus via DVR's UTC, manual-focus, auto-focus, and several modes can be used.

(3) You can set the modules' parameter via DVR'S UTC, and you can also switch output AHD 1080P or CVBS 960H

(4) With TDN AF (Auto focus after Day-Night switched) on the OSD menu, Unique AF algorithm, no matter it's day or night, after IR-Cut switched, the image can be at the optimum definition.

UTC technique introduction:

UTC means Up the Coax (UTC), transferring 2 kinds of signal via general coaxial cable.

One is image signal, the other is control signal. Use coaxial cable to transfer video signal and control signal from cameras at the same time, through the function  you can control the cameras by DVR with UTC function easily, including OSD menu parameter setting and so on.