1/2.5" 8MP IMX274 Hisilicon Hi3519V101 security CCTV IP Camera board H.265 H.264

1/2.5" 4K 8MP CMOS image sensor;
Support H.265/H.264/MJPEG
Support three stream, Main-stream: 3840*2160；sub-stream:704*576/640*360/352*288
Support WDR, 3D-NR, HLC, BLC, Auto-White balance for different environment
Support ONVIF；Can connect with other company's NVR
ICR switching to surveille 24 hours
Support image shutter, 4 shutter area can be set
Support audio input/output
Support motion detection, motion detection alarm will be send to email automatically
Support OSD setting and network timing
Support mobile surveillance(iOS, android), Web and VMS；
Suport PoE (optional)；

Main chipset	Hi3519V101
Image sensor	1/2.5" 8MP Sony IMX274
Features
D/N	Support D/N switching (support IR-CUT)
Shutter	1/12-1/10000
White balance	Auto
BLC	Support
Noise reduction	3D-NR
WDR	D-WDR
Motion detection	Support
Privacy region	4 areas
Mirror	Support
OSD	Support OSD setting, drag the position freely
Scheduled Reboot	Support
Video
Compression	H.264, H.265, MJPEG
Resolution
Main-stream:	3840*2160
Sub-stream:	704 * 576 / 640 * 360 / 352 * 288
Frame rate	25fps(50Hz), 30fps(60Hz)
Bit rate	64Kbps~16Mbps CBR / VBR adjustable
Video adjustments	Brightness, saturation, hue, contrast, sharpness
Network
Ethernet	RJ-45 10M/100M
WiFi	Not available
Network protocol	HTTP, TCP/IP, IPv4, UPNP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, DDNS, FTP, IP Search (Support P6S IP camera, DVR, NVS etc.)
Access protocol	Support ONVIF 2.4 / privacy protocol / CGI
Max users	8
Client	iPhone, iPad, Android, Windows
Audio
Audio	G.711U G.711A
Input	1ch Input
Output	1ch Output
General specifications
Size	(38x38)
Temperature	-30℃～+60℃
Power	DC12V 2A

JP1 Power interface		Preview	Pitch
1	DC12V		1.25mm
2	Video GND
3	CVBS output
4	GND
JE1 Network interface			1.25mm
1	RJ45_1 (TX+)
2	RJ45_2 (TX-)
3	RJ45_3 (RX+)
4	RJ45_6 (RX-)
5	Network connection indicator light (green light)
6	Network status indicator light (yellow light)
Sensor board J1 IR-cut interface			1.25mm
1	IR-CUT control signal 5V-
2	IR-CUT control signal 5V+
Sensor board J2 DC auto Iris interface (Support automatic aperture model: -AI)			1.25mm
1	drive-	Depend on color definition of Lens
2	damp-
3	drive+
4	damp+
Sensor board J3 Power Auto Zoom lens interface (Support Electric lens model:-AZ)			1.25mm
1	Focus A-	Depend on color definition of Lens
2	Focus A+
3	Zoom A-
4	Zoom A+
5	Zoom B+
6	Zoom B-
7	Focus B-
8	Focus B+
Sensor board J4 No definition
J5 Infrared Light board interface			1.25mm
1	Infrared Light board12V power output
2	GND
3	LED feedback signal input(0.8V-12V)
4	Infrared Light enable control
J6 function interface			1.25mm
1	Audio in	Support powerless microphone and Line in
2	Audio GND
3	Audio out
4	GND
5	Reset
6	Alarm in 1, low level effective
7	Alarm in 2 (reserve), low level effective
8	Alarm out control GPO, 3.3V level signal
9	RS_485+
10	RS_485-
JU1 USB interface			1.25mm
1	GND	Support MT7601 / RT5370 USB wifi module. Support TF card extension board.
2	USB_DP
3	USB_DM
4	5V power out
J7 expandion board			FPC
1	USB_DP
2	USB_DM
3	System
4	SDIO Work Clock
5	SDIO Data3
6	SDIO Data2
7	SDIO Data1
8	SDIO Data 0
9	System
10	SDIO Order
11	SDIO Power enable control signal
12	SDIO Card detection signal
13	SDIO Pull-up resistor power out
14	Alarm out control GPO
15	System
16	DC5V Power out

Search form